FLARE Moustache

The reflex profile keeps the wing stable at a low angle of attack and at full acceleration. The counter-arching pushes the trailing edge down and prevents a front stall. The reflex profile is essential for controlling and depowering your parakite.

The Automatic Drainage System hides in the internal construction of our parakite. Sand and small objects that get inside the wing slide automatically from the middle section to the wingtips. They exit the wing through two big holes at the trailing edge of the wingtips. This signifcantly prolongs the life of your glider

The Killer Mushroom is the perfect tool to kill your MOUSTACHE, it is connected on the B level and will stop your wing completely from generating any lift. The best emergency help when you are standing on the ground and the wind gets too strong and you want to bring your wing to the ground.

Don't use while flying – please DON'T! 

THIS is adds the real 3rd Dimension to flying!

It's the first wing in the history of flying uniting steering handles and accelerator.

• The pulley-system “mixes” the B and C level with a certain ratio to the brake travel. 

• The C-level moves with a ratio of 1/3 of the Braketravel.

• The B-level moves with a ratio of 1/6 of the Braketravel.

That means you can fully adjust your glide ratio by completely changing the angle of attack of your wing. This combination was the key to success. 

Equipped with the super stable reflex profile construction with positive momentum means that the wing always wants to fly away from you and keeps line tension, even in fully accelerated flight.

Your brake handle is connected with an elastic Free Brake Line, to be quickly able to grab it when standing on the ground. 

Don't release the brake handle while flying and stay in the loops.

We have placed a left and right label on each end of the two risers where the best trim is situated. When you fly with the brake T-Piece at this position, you are going to achieve best glide ratio. Furthermore, the left and right labels help you to organize your lines when you connect the MOUSTACHE to your harness.

The Riser Fix System is a rigid rod that is sewn into the trailing edge and slots into side pockets. You can slide it through your riser loops to keep them perfectly organized when packing or unpacking your wing. It also prevents line tangling when packing or unpacking your wing. Together with the left and right "Best Trim" Labels starting your session will get much easier. Put the rigid rods back in the pockets when flying.